Selectpart V series friction pads to fit the following Montalvo brakes


H302V is the standard pad supplied with all Montalvo V pad equipped tension brakes.

 

Selectpart-Montalvo V Series Friction pads

The following chart details available friction pads based on Coefficient of Friction* and material composition.

Selectpart
#
Montalvo
#
COFTab
Color
MaterialDescriptionID #
(on_back)
SDSPrice
Request
H302VV4512HighNoneCarbon base with various phenolic fillers and bonding agents.Standard material for most applications. Low cost. One of the best pads for noise problems.H302VGo To Form
H302V Anti-Sql
V4512 Anti-SqlHighNoneCarbon base with various phenolic fillers and bonding agents.Standard material for most applications with Anti-Squeal noise reducation. Low cost. One of the best pads for noise problems.
H302VGo To Form
H313VKevlar+MediumNone (Solid Tan Pad)Kevlar base with carbon base backing, phenolic fillers and bonding agents.Stable COF at most temps and pressures. Good for high wear applications (HP26) with high power dissipation requirements.H313VGo To Form
M201VV3012MediumYellowCarbon base with various phenolic fillers and bonding agents.General use. Med-friction, med torque. May glaze at high temps/low pressures. Unstable above 350F. One of the best pads for noise problems.M201VGo To Form
M203VV3001Medium

None

(Solid Green Pad)

Teflon w/fiberglass, fillers, and bonding agents.High speed, low temp, low torque. Stable COF at low temps. Unstable above 200F. COF lower at slow speeds. Very quiet.M203VGo To Form
L100VV1011LowRedCarbon base with various phenolic fillers and bonding agents.General use. Low friction, low torque. May glaze at high temps and low operating pressures. Unstable above 350F.L100VGo To Form

*Coefficient of Friction (COF) rating is approximate and may vary with changes in environmental conditions.